AUGER DRILL BITS

MILW AUGER DRILL BIT 1/2 X 6

MILW AUGER DRILL BIT 5/8 X 6

MILW AUGER DRILL BIT 3/4 X 6

MILW AUGER DRILL BIT 7/8 X 6

MILW AUGER DRILL BIT 1 X 6

MILW AUGER DRILL BIT 1-1/4 X 6

MILW AUGER DRILL BIT SET 4PC

MILW AUGER DRILL BIT SHIP 3/4

MILW AUGER DRILL BIT SHIP 1

BIT SHIP AUGER 1-3/8

MILW AUGER DRILL BIT SHIP 9/16

MILW AUGER DRILL BIT SHIP 7/8

BIT SHIP AUGER 15/16

MILW AUGER DRILL BIT SHIP 1-1/8

BIT SHIP AUGER 1-1/4

SHORTY AUGER BIT 3/4" X 4-1/2"

SHORTY AUGER BIT 1" X 4-1/2"

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.

Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank

Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank

Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank

Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank

Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank

DIVERSABIT 3/8"X 54" AUGER

For aggressive chip removal in many types of woods. Screw point for easy starting and pulling through wood. Hole in bit for attaching pulling grip. With screw point removed, this bit can be ground to function like a standard combination bit.

Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval. Hole in bit for attaching pulling grip.

MIL SHIP AUGER 1" X 6"